Skip to content

Linksys RE9000 Setup

High-performance tri-band range extenders like the Linksys RE9000 setup are made to increase Wi-Fi coverage and get rid of dead zones. It provides smooth connectivity for smart devices, streaming, gaming, and more, with support for speeds up to AC3000. It connects onto your network fast and offers simple Linksys RE9000 extender Setup choices using the Linksys app or browser-based settings. Because of the RE9000’s MU-MIMO technology, several devices may connect quickly and reliably. In addition, it has four Gigabit Ethernet ports for wired connections and a dedicated backhaul for effective data transport. Any Wi-Fi router may be used with the extender, giving your home or workplace network more flexibility and improved performance.

Linksys Extender Setup RE9000 Manual

  • Connect to the RE9000’s built-in Wi-Fi network (SSID listed on the device label) via a PC or smartphone.
  • Go to http://extender.linksys.com in a web browser.
  • To configure the extender, adhere to the on-screen directions. 
  • By choosing the network and providing the password, you may connect the extender to your home Wi-Fi network.
  • Finish the Linksys RE9000 extender Setup and check the connectivity.

Linksys RE9000 Setup With App

  • Get the Linksys app.
  • Create a Linksys account or log in.
  • Connect your device to the RE9000’s built-in Wi-Fi network after plugging it in.
  • After launching the app, select “Set up a New Product.”
  • To join the extender to the router network, choose “Range Extender” and adhere to the directions.
  • Adjust the settings as you like, then verify that the Linksys RE9000 Setup was successful.

Linksys RE9000 Extender Setup WPS

  • Press router WPS switch.
  • Press the RE9000 extender’s WPS button within two minutes.
  • Watch for the LED on the extension to become solid green, signifying that the connection was successful.
  • In dual-band configurations, click the WPS button on both devices once more to repeat the procedure for the second band.
  • Verify connection by examining the network signal’s length.

Linksys RE9000 Firmware Update

  • Use Ethernet or Wi-Fi to connect the RE9000 to a PC.
  • Visit http://extender.linksys.com and enter your administrator credentials.
  • Navigate to Settings and choose Firmware Update.
  • Press the “Check for Updates” button. Click “Transfer and Install” if there is update accessible.
  • Restart when the firmware has been updated. Don’t disconnect while the update is happening.

Reset Linksys Extender

  • On the rear panel of the extension, find the Reset button.
  • To get the LED to blink, press and hold the Reset switch.
  • Release switch and let extender restart.
  • The extender will revert to its initial configuration. To reconfigure, repeat the Linksys RE9000 Setup procedure.

Linksys RE9000 Setup Issues And Troubleshooting

To diagnose and fix any difficulties you’re having configuring your Linksys RE9000 Range Extender, follow these steps:

1. Common Problems with the Linksys RE9000: 

Unstable Wi-Fi or Connection Drops

  • Clients encounter sporadic connectivity issues or the extender regularly disconnects from the primary network.

Issues with Setup

  • The extender cannot be configured or connected to the router.

Slow Internet speeds

  • When compared to the primary router, the extension offers slower speeds.

The device is not turning on

  • There are no lights on the extension, and it seems unresponsive.

Firmware-Specific Problems

  • Performance or compatibility problems are caused by outdated firmware.

Not able to access settings of extender

Insufficient coverage or no increase in Wi-Fi range

  • Dead zones continue to exist or Wi-Fi coverage is not enhanced.

Steps for Troubleshooting

Connection Drops or Unstable Wi-Fi Verify 

  • Placement: Make sure the extender is not too near to your router but still within range of its Wi-Fi signal.
  • Interference: Keep the extension away from metal items, walls, and appliances that could interfere with it, such as microwaves and cordless phones.
  • Devices for Reboot: Restart the extender and your router.
  • Band selection: Choose the best band for your devices (2.4 GHz for a greater range, 5 GHz for higher speeds near the extender).

2. Issues with Setup

Factory Reset:

  • To return extender to its original settings, hold down Reset switch.

Apply the WPS Method:

  • Press router WPS knob.
  • Hold extender WPS knob.
  • Utilize the WPS Method by pressing the router’s WPS button.

Manual Setup: 

  • Open a browser window and navigate to http://extender.linksys.com while connected to the extender’s default Wi-Fi network.
  • To link it to your router, adhere to the on-screen directions.

3. Slow Internet speeds

Check bandwidth: 

  • Verify your internet package and router’s bandwidth to make sure they can accommodate several devices.

Extender Repositioning: 

  • Make sure the extender is situated in a region with robust router signals.

Tri-Band Utilization: 

  • For faster speeds, the RE9000 makes advantage of a dedicated backhaul. Check settings to validate that this is working.

Firmware Update:

  • To enhance performance, update to the most recent firmware.

4. The device is not turning on.

Verify Power Connection: 

  • Verify that the power cord is firmly attached to the outlet and the extension.

Problems with the outlet:

  • Try using the same outlet with another device.

Reset: 

  • Try a factory reset if the gadget is powered on but not responding.

5. Updates to Firmware

Update Manually: 

  • Go to Linksys website and transfer current firmware for the RE9000.
  • Go to the web interface of the extension.
  • After downloading the file, select Firmware Upgrade and submit it.

Automatic Updates: 

  • Verify that the settings allow automatic updates.

6. The Extender’s Settings Are Not Accessible

IP Address Problem: 

  • Use a tool or access the devices connected to your router to connect to the extender’s Wi-Fi and verify its IP address.

Web Access: 

  • To log in, use http://extender.linksys.com or the default IP (192.168.1.1).
  • Browser cache: Clear cache in browser or try new browser.

7. Poor Coverage: 

  • Placement: For best results, position the extender in an open space.
  • Signal strength indicator: The signal strength indicator on the extension may be used to determine the ideal position.
  • Mesh Compatibility: Make sure that the Linksys mesh system is compatible and that the settings are correct.

More Advice

  • To switch to access point mode: connect the RE9000 to your router via Ethernet. If the extender mode isn’t enough, switch to access point mode.
  • Look for any IP conflicts: Make sure no other devices share the extender’s IP address.
  • Enable beamforming: Better client connectivity can be achieved by turning on beamforming, if it is supported.

FAQS

1. Does the RE9000 support dual or tri-band networks?

The Linksys RE9000 is a range extender with three bands. By allowing quicker speeds for numerous devices, its two 5 GHz channels and one 2.4 GHz band enhance connection and lessen congestion.

2. Can the RE9000 be used in Access Point mode?

It is possible for the Linksys RE9000 to operate in access point mode. It adds connected stability to your network by connecting it straight to your router with an Ethernet connection.

3. What devices are compatible with the RE9000?

Any gadget that complies with Wi-Fi standards, such as laptops, tablets, smartphones, smart TVs, and Internet of Things devices, can use the RE9000. Additionally, it is designed to work seamlessly with all mesh systems and wireless routers.

4. Can I use the Linksys RE9000 with any router?

As long as the router has Wi-Fi, the RE9000 may be used with any router. Although it works well with non-Linksys versions, it links easily with Linksys Max-Stream routers for best performance.